Finally a lightweight yet strong Roof Rack for a JK Wrangler that works with your hard top and soft top. No drilling - installation completely bolt on. Made from Steel and Aluminium it is a well balanced yet strong Rack that is designed to be easily flipped back to allow you to take your soft top up or down (no tools required).
In standard form this Rack allows your freedom panels to be removed on your hard top while still enjoying that open air feel.
Features:
- Vehicle height increase of 190mm from the hard top
- Front light bar hoop mounts to A pillars and is made from Steel and powder coated Textura Black (can be sold separately)
- This Roof Rack mounts extend much further up the A pillar than others to prevent excessive flexing when loaded up
- Made from thick 3.2mm steel the front hoop is twice as thick and strong as competitors
- Front hoop can mount LED light bars underneath or 4 spot lights above. Optional brackets supplied for a 50" LED light bar under the top hoop and above the windscreen
- Rear hoop made from Steel and supported by Roof Rack pivot points which house heavy duty 4WD Leaf Spring bushes. These bushes soak up the vibration and movement experienced by the Rack during heavy off road use or corrugated roads. Designed to move with the vehicle to prevent cracks in the Rack
- Top Roof Rack made from 6061 aluminium tube 32mm x 3mm thick
- Roof Rack area is lined with expanded Aluminium mesh which allows even small items to be stored up top
- Proudly made in Australia
- Steel components are powder coated in Textura Black for long lasting corrosion resistance
- Aluminium components are chromated then powder coated in Textura Black for unmatched powder coat adhesion
- Light weight system. Entire kit adds only 34kg to your vehicle, with top rack only weighing 13kg (excluding options)
- Fits with all Wrangler soft tops and hard tops
- Folds back in under 2 minutes with no tools
- No drilling. Installation is completely bolt on
- Rated to 125kg dynamic loading
- Rated to 250kg static loading
- Can mount to existing Steel Rear Bumpers, or with added chassis brackets to other aftermarket bumpers and factory plastic bumper (see options above). Confirmed with the following Rear Bumpers, Uneek 4x4, Mopar, ARB (old style no tyre swing out) and Kaymar
- Rack works with Safari and AEV snorkels
- Kit includes chassis brackets for factory bumper
Options include:
- Bolt in sun roof panel for a full length Rack (can be added here)
- Rear ladder (can be added here)
- LED light bar mounts (can be added here)
- Bolt on Ladder Mount
- LED light bar mounts
- Bolt on Shovel and Axe Mounts (quick fists)
- Bolt on Hi-Lift Jack mount (quick fists)
- Full length capabilities (sun roof panel)
- Cross tubes available for roof top tents
- Wind deflector available (can be added here)
5 reasons to choose Uneek 4x4's Roof Rack for your JK Wrangler
1. Uneek Racks are made from thicker Steel where it counts with our front and rear hoops being 3.2mm and 1.6mm. Aluminium is used up top so it's actually lighter and stronger than the rest
2. Uneek Racks are welded at the base of A pillar and up top of A pillar. Areas not having these extra welds can cause the Rack to hit the windscreen when fully loaded on rough roads
3. Uneek Racks do not use pads against the body. At Uneek it's understood the front is body mounted and the rear is chassis mounted, to restrict movement and uses 4WD suspension bushes to soak up these movements
4. Uneek Racks can be used with hard top, soft top or no top
5. Uneek Racks require no tools to tilt it back
This Rack is a step above the rest with a combination of Steel and Aluminium. All mounting points are tough steel where it counts.
Fitting time: 1-3 hours
Fitting difficulty: 4/10
